Changzhou Fangsheng Computer Room Equipment Co., Ltd.
Main products:Anti-Static Raised Floor,OA Access Floor,PVC Tile,Calcium Sulphate Panel,Wood Core Raised Floor
Products
Contact Us
  • Contact Person : Ms. Xu Cherry
  • Company Name : Changzhou Fangsheng Computer Room Equipment Co., Ltd.
  • Tel : 86-519-85353153
  • Fax : 86-519-85353153
  • Address : Jiangsu,Changzhou,GongQing ,Cuiqiao,Henglin,Changzhou
  • Country/Region : China
  • Zip : 213100

Plastic floor

Plastic floor
Product Detailed
Plastic floor: 1.ISO9001 2.Brand name:Fangsheng 3.size:600X600mm 4.thicknes:1.0-5.0mm

Plastic floor :

Description: This product has permanent anti-static function because it uses conductive staic network formed at the interface of plastic particles. Its appearance looks like the pattern of marble. So it has good decoration effect i

Application: It is widely used for program machine room, computer room, control room of electric power,cleaning and purification workshop of telecommunication, electric power, electronics, micro-electronics and medicine industries and other places where it is necessary to be protected from electrostatic discharge.

Specifications:

Item

System Resistance

Decay Time

Rate of size change at heating

Starting Voltage

Amount of wear

Combustion Property

Standard

DIN51953

SJ/T10694-2006

SJ/T11236-2001

SJ/T10694-2006

SJ/T11236-2001

SF/T11236-2001

Index

104~106Ω(Conductive)

106~108Ω(Anti-static)

1000V-100V

≤2s

≤0.25%

≤100V

≤0.02g/cm2

≤10s

FV-O

 Brief Introduction of Installation

(1)the requirements of foundation1.The ground should be waterstone ground, ceramic tile ground, wooden ground or cement ground.2.The ground should be smooth and level. Its unflatness should be less than 0.2%.3.The ground should have enough strength and no the phenomenon of sand coming out and separation.4.The ground should be dry. It is necessary for a new ground to dry about 30days

(2)Procedure of constructionClean the ground→spread the earthing conductive net→lead out the earthing line→coat strong adhesive→coat conductive adhesive→lay floor→welding floor→cleaning→inspect properties

(3)Maintenance of floor1.It is not permitted that sharp and rough heavy matters scribe and drag on the surface of floor and that personnel who wear shoes with nails walk on the floor. The floor should be kept cleaning.2.It is not permitted that the chairs which have black rubber cushion put on the floor in order to avoid black sulfide polluting its surface.3.If there are oil or dirty on its surface, it may be cleaned with detergent. If there is scribed sign, if can be recovered through fine abrasive paper.4.If there are heavy oil and dirty caused by install equipments. Our factory has special washer to clean them.5.Our factory also has anti-static wax that can be used to maintain the floor. In general, it should be coated one time every six months. If the personnel walking on the floor are busy, it should it should be coated every three months.

Plastic floor



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.